Name

Thomas structural adhesive    (THO200)

Outline

It is double-component acrylic acid adhesive. It is easy and convenient to use for it cures fast at room temperature and bonds well.

Applications

It is applied to the bonding of metals, ceramics, stones, plastics and cement products

Features

Part A is liquid in white or yellow, part B is white paste.

Fast curing speed. At 25 °C, during its 15-20 minutes, its surface cures, it reaches its maximum bonding strength 4 hours later..

Being weather and heat-resistant, it adapts to a wide range of temperature and bonds well under high temperature.

Mix the two components in a certain proportion, apply it to the surface of the substrates acquiring no strict treatment, which makes it so convenient to use.

You’ll get long term durability and resistance to moisture, chemicals, oils, and temperature extremes.

Non-toxic after solidification, though it is a little smelly.

Being stable, its storage time is one and half a year.

The main technical parameters are as follows:

Viscosity(mpa.s)4000-7000:

Heat resistance scope：- 40°C－+ 100 °C

tensile strength≥25MPa; Shearing strength≥25 MPa  

Instruction

1. Clean the surface of the material, make sure they have no dust or oil on them, wait until they are dry.

2. Mix A and B in a proportion of 10: 0.5--1.5 to get perfect bonding result and apply it evenly on the substrates.

3. Spread the mixture on the substrates, put them together and apply some strength on it.

Notes

1. The tools used to get adhesives should be different.

2. It is necessary to keep it well ventilated and away from fire.

3. If it has contact with skin, you should wash with soap.

4. It can be stored at well-ventilated places with low temperature, and keep them away from fire. Cover the lip after using it.