Product name

UV adhesive for PC（THO2203）

Outline

This single component product is made of modified acrylic anaerobic adhesive. It cures with light, so it is convenient to use.

Application

The product is used to cement PC materials and glass products.

Features

the product is colorless and transparent viscous liquid without mechanical particles.

It cures fast.

It meets cement requirement perfectly with satisfactory bonding strength.

The formed film is transparent. The transparency rate after it solidifies is ≥90%.

You.ll see long term durability and resistance to moisture, chemicals, oils, and temperature extremes.

It is non-toxic after it solidifies, so it is convenient and safe to use.

Stable: the storage time is half a year at normal temperature.

Solidifying condition

80w/cm   distance: 10cm

Solidifying time(s)second

5--10

10--20

20--30

Tensile and shearing strength(≥MPa)

15

18

25

Refractive index

1.47--1.48

Durability at high temperature(80℃ 400HR)

Not abnormal

Instructions

A.     After the can is opened it could be used directly without stirring. For keeping from stirring in air to form bubbles, causing flaws on cementing sides.  

B.     Make sure both cementing sides are clean without dust and oil, otherwise the cementing effect will be impacted. (Clean cementing sides with acetone solvent if necessary.)

C.     First besmear one side with adhesive, and stick two sides together. It solidifies within about 5-30s with ultraviolet. If assembled parts are easy to slide and shift, irradiate it with black strip lamp for 8-15s for preliminary fixation. And solidify it with ultraviolet. By doing so assembly rejection rate could be reduced.

D.     After it is opened, it is necessary to fasten the cap, lest quality be impacted by vapor.

E.     Place adhesive in cool and dry places, to avoid direct sunshine.

F.      Solidifying time is influenced by material thickness, distance of light and other factors. Therefore, it is necessary to test irradiating time of ultraviolet before operation.   

Notes

1.     Besmear adhesive smoothly and evenly.

2.     Pack product with dark color package and place it in cool and well-ventilated places, to avoid direct sunshine.