Product name

UV gloss oil(THO4407）

Outline

This one-component product is made of modified acrylic anaerobic adhesive. It solidifies with light, so it is convenient to use.

Application

This product is used for the maintenance of toys, motorcycles, automobiles, ships, electronics, electrical appliances, CD, printing and dyeing cloth, leather cleaning, books, packaging and printing, wood, porcelain, plastic products, and so forth.

Features

the product is colorless and transparent viscous liquid without mechanical particles.

It cures fast.

It meets cement requirement perfectly with satisfactory bonding strength.

The formed film is transparent. The transparency rate after it solidifies is ≥90%.

You.ll see long term durability and resistance to moisture, chemicals, oils, and temperature extremes.

It is non-toxic after it solidifies, so it is convenient and safe to use.

Stable: the storage time is half a year at normal temperature.

Solidifying condition

80w/cm   distance: 10cm

Solidifying time(s)second

5--10

10--20

20--30

Tensile and shearing strength(≥MPa)

15

18

25

Refractive index

1.47--1.48

Durability at high temperature(80℃ 400HR)

Normal

Instructions

A.     After the can is opened it could be used directly without stirring, for stirring in air forms bubbles, which may cause flaws on cementing sides.

B.     Make sure both cementing sides are clean without dust or oil, otherwise the cementing effect will be impacted. (Clean cementing sides with acetone solvent if necessary.)

C.     First smear one side with adhesive, and stick two sides together. It solidifies within about 5-30s with ultraviolet. If assembled parts are easy to slide and shift, irradiate it with black strip lamp for 8-15s for preliminary fixation. And solidify it with ultraviolet. By doing so assembly rejection rate could be reduced.

D.     After it is opened, it is necessary to fasten the cap, lest quality be impacted by vapor.

E.     Place adhesive in cool and dry places, to avoid direct sunshine.

F.      Solidifying time is influenced by material thickness, distance of light and other factors. Therefore, it is necessary to test irradiating time of ultraviolet before operation.   

Notes

1.     Smear adhesive smoothly and evenly.

2.     Pack product with dark color package and place it in cool and well-ventilated places, to avoid direct sunshine.