Name	Transparent high temperature resistant adhesives with wide applications（THO4063）
Outline	It is modified epoxy adhesive, and its viscosity and color are adjustable. It is easy and convenient to use for it cures fast at room temperature and forms bonds that are resistant to shock, impact, thermal cycling, and chemicals.
Applications	This product is applied to the bonding, coating, sealing of concrete, masonry, marble, stone and glass. Besides that, It also applies to the coating and bonding of silicate and blended composite materials.
Features	The A component is the tinted thick liquid, non-solid particle. The B component is in tinted paste shape. Fast curing speed. At 25 °C, 1-3 hour later, the surface cures, 18 hours later, it reaches its maximum bonding strength. It cures during 40-60 minutes if put into heating oven of 80-100 ℃ Being durable and resistant to ultraviolet light once the bond has formed. Being heat-resistant, it adapts to a wide range of temperature and bonds well under high temperature. With moderate viscosity, the adhesive leaves no bubbles, making the surface smooth and bright. Mix the two components in a certain proportion, apply it to the surface of the substrates acquiring no strict treatment, which makes it so convenient to use. You.ll see long term durability and resistance to moisture, chemicals, oils, and temperature extremes. Non-toxic after it cures, though it is a little smelly before the bonds form. Being stable, its shelf life is one and a half year. The main technical parameters are as follows: Heat resistance scope：- 48 °C－+ 155 °C Bonding strength:   room temperature: Tensile strength≥35MPa; Shearing strength≥28 MPa At 150 °C: Tensile strength  3-5 MPa
Instruction	1. Clean the surface of the material, make sure they have no dust or oil on them, wait until they are dry. 2. Mix A and B in a proportion of 4: 1 to get perfect bonding result at fastest speed at 25 °C.. 3. Spread the mixture on the substrates, put them together and apply some strength on them, finally, let them dry for 2-4 hours. 4. If the surface of ceramics needs to be shaped after the coating, hot press molding or cold press molding should be applied when the adhesive is in its preliminary curing time.
Notes	1. Use another can or container to blend A with B. The tools used to get A and B should be different. 2. A and B should be mixed well. 3. It is necessary to keep it well ventilated and away from fire. 4. If it has contact with skin, you should wash thoroughly with soap and water. 5. It can be stored at well-ventilated places with low temperature, and keep them away from fire. 6. Cover the lip after using it.